Amana Tool 1/2 in Shank 2 Flute Carbide Bowl and Sink Trim Bit with Ultra-Glide Ball Bearing Guide, 3/4 in x 3-1/4 in

AMN57153 MFG #: 57153
  • Brand: Amana Tool
  • Compatible tools & materials: 47726 replacement bearing
  • Cutting height: 1 in
  • Diameter: 0.75 in
  • Item Recyclable: True
  • Item Returnable: True
  • Length: 3.25 in
  • Made in US: False
  • Manufacturer: AMANA TOOL CORP
  • Material: Carbide
  • Number of flutes: 2
  • : AMN57153
  • : 57153

Trim a sink cutout flush with the bowl in stages using these over hang and flush trim bits in tandem. The overhang bits are equipped with non marring Ultra Glide bearings that are tapered to match the slope of the bowls side.

A first pass with the appropriate overhang bit cleans the cutout edge, leaving a very slight overhang at the underside of the counter. A pass with the flush-trim bit completes the operation.

  • Trims a sink cutout flush with bowl, in stages, using the overhang and flush trim bits in tandem
  • First pass with overhang bit cleans the cutout edge, a pass with the flush trim bit completes the cutout
  • Diameter (D) 3/4; Angle (a°) 10°; Cutting Height (B) 1
  • Shank (d) 1/2; Overall Length (L) 3-1/4; Type 1/16 Over-Hang
  • Replacement Bearing 47726; Flutes 2