Amana Tool 1/2 in Shank 2 Flute Carbide Insert Super-Rabbet Bit with Ball Bearing Guide, 2 in x 3 in
Drills & Bits
MPN: AMN49360 AMN49360 MFG #: 49360
  • Brand: Amana Tool
  • Compatible tools & materials: Plywood
  • Cutting height: 7/8 in
  • Diameter: 2 in
  • Item Recyclable: True
  • Item Returnable: True
  • Length: 3 in
  • Made in US: False
  • Manufacturer: AMANA TOOL CORP
  • Material: Carbide
  • Number of flutes: 2
  • Size: 2 in x 3 in
  • Used for: Plywood
  • : AMN49360
  • : 49360

This ingenious tool features both interchangeable cutting edges and an interchangeable guide collar, enabling you to cut a wide range of rabbets. Changing the collars on the twin ball bearing guide steps the cut width in 1/16 in increments from flush through 3/4 in with five extra plywood sizes.

Between the standard and optional collars, there are 18 different rabbet sizes available. The deep guide collar design adds stability to the tool for hand held router operations. The basic 2 in Dia bit includes a hex key, instructions, and all necessary parts for 5/8 in and 3/4 in width rabbets.

The RC version has extra long double edged carbide inserts which enables the bit to cut 30 mm high. Inserts can be rotated or replaced without removing the bit from the router. Maximum RPM 22000.

Use in a table-mounted router. Not for use in a handheld router!

  • Features interchangeable cutting edges and interchangeable guide collar
  • Comes complete with all parts for 5/8 in and 3/4 in W rabbets
  • Can cut 16 different depths from flush to 7/8 in by purchasing collar kits
  • Diameter (D) 2; Cutting Height (B) 7/8; Shank (d) 1/2
  • Overall Length (L) 3; Flutes 2; C 5/8 & 3/4