Amana Tool Cut-Off and Crosscut Circular Saw Blade, 10 in x 80T TCG
Saw Blades
MPN: AMNDT10801 AMNDT10801 MFG #: DT10801
  • Brand: Amana Tool
  • Compatible tools & materials: MDF, OSB, HDF, Single or Double-Sided Melamine and Plastic Laminated Panels
  • Diameter: 10 in
  • Item Recyclable: True
  • Item Returnable: True
  • Made in US: False
  • Manufacturer: AMANA TOOL CORP
  • Material: Carbide
  • Size: 0.126 in Kerf
  • Thickness: 0.087 in
  • Used for: Sliding table saws, such as Striebig®, Altendorf®, SCMI® and Delta® models, regular table saws
  • : AMNDT10801
  • : DT10801

This high-performance crosscutting blade is designed primarily for use in sliding table saws, such as Striebig®, Altendorf®, SCMI® and Delta® models.

They are also suitable for use in regular table saws.

The blades incorporate an exceptional array of features: high tooth count, expansion slots and turbulence-dampening copper plugs.

The DITEC™ carbide tips add exceptional sharpness and long tool life to these features. TC grind is for MDF, OSB, HDF, single or double-sided melamine and plastic laminated panels.

For maintenance grinding, use fine grit (D400 to D600) diamond wheels. To match the factory grind, use a slower than normal feed rate. Damaged teeth can be replaced by any grade of carbide tooth. Replacing of a large number of teeth will, of course, shorten the life of the saw blade. Since the carbide in the DITEC™ is harder than other carbides, it is critical that you protect them from “thermal shock” if an adjacent tooth is replaced. Heat absorbed during the brazing process will seriously degrade the DITEC™ carbide.

  • Exclusive DITEC™ carbide tips
  • Higher reliability and lower maintenance
  • Low noise level
  • Laser cut saw bodies; Excellent cutting quality
  • (D) Diameter 10 (250mm); Teeth 80; (d) Bore 5/8; Tooth Grind TCG; Hook Angle 10°; Kerf (B) .126 (3.2mm); Plate (C) .087 (2.2mm)