MelaGard White Melamine Shelving - Drilled Standards

SM158WHR MFG #: 1008076
  • Application: Fixtures & Displays
  • Brand: Roseburg
  • Color: White
  • Dimensions: 3/4" x 15-3/4" x 97" (sold in 3-pc increments)
  • Edge profile: Square edge
  • Finish: Melamine
  • Item Recyclable: True
  • Item Returnable: True
  • Length: 97 in
  • Made in US: True
  • Manufacturer: ROSEBURG FOREST PRODUCTS
  • Material: Particleboard core
  • Sub Brand: MelaGard
  • Thickness: 0.75 in
  • Used for: Residental and commercial storage
  • Weight: 34 lb
  • Width: 15.75 in
  • : SM158WHR
  • : 1008076

Roseburg MelaGard shelving is manufactured with a particleboard core and a finished face, back and one edge. Its durable and stain-resistant Duramine® thermally fused laminate surface makes this shelving ideal for residential or commercial storage applications.

Roseburg shelving can be easily cleaned with warm water and mild soaps. Do not use cleaners containing abrasives, acids or alkalis. Oversprays and adhesives are easily removed with solvents recommended for such use.

Roseburg shelving is available raw or in a variety of solid colors and woodgrains that are exceptionally smooth, hard and have a durable surface that resists stains, abrasions, moisture and fading. The strength of particleboard creates a sturdy and durable shelf that is perfect for a multitude of residential and commercial applications.

This shelving comes with two rows of 5.0 mm holes drilled 32 mm OC and edgeband on one long edge, with holes drilled halfway through.

NOTE: 15-3/4" widths are sold in 3-piece increments.

  • MelaGard shelving with drilled standards, ready to install.
  • Damaged or chipped melamine shelves can be repaired in the same manner as a high-pressure laminate.
  • With the proper selection and maintenance of power cutting tools, Roseburg shelving can be easily machined. Carbidetipped cutting tools are recommended for sawing, drilling, routing, joining, fastening and edge-machining.
  • Remember: a portable 7-1/4” saw can chip the upper side of the panel (saw face down), and a table or radial-arm saw can chip the bottom edge (saw face up). In all instances, the saw should be maintained so as to ensure low vibration and smooth runout, clean collars, and sharp, properly ground teeth.
  • Produced using 100% pre-consumer recycled wood fiber.