Amana Tool 10 mm Shank Carbide Brad Point Boring Bit - Left Hand Rotation
Drills & Bits
MPN: P-AMN301005 P-AMN301005

Amana Tool® dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use.

Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Amana's coating is applied onto the bit at a temperature of 570 deg F.

The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

  • Specifically designed for use in automatic boring machines
  • (B) Cutting Height 27 mm (for 57 mm length) or 35 mm (for 70 mm length)
  • (D) Diameter 5 mm. 8 mm or 1/4 in; (d) Shank 10mm
  • Overall Length (L) 57 mm (2.24 in) or 70 mm (2.76 in)
  • Rotation: Left Hand
  • Size