44 items
-
- Compatible materials: Trex Grooved Deck Boards
- Includes: 1-5/8" stainless steel screws and (1) driver bit
- Recommended spacing: A fastener is needed at every intersection of a joist and decking board. When using 5.5" decking with 16" on center joists: Square footage x 1.75 = # Fasteners.
-
MPN: P-FMTR3-212-75ENBD SKU: P-FMTR3-212-75ENBD- Compatible materials: Approved for use with Azek PVC, Timber Tech, Trex Transcend, Trex Enhance, Trex Select, Fiberon Horizon, Fiberon Paramount, Deckorators, MoistureShield, Veranda and ChoiceDek brands
- Compatible tools: 0-1800 RPM variable speed corded drill,18V cordless drill, or impact drill; Standard Torx bit also drives screw
- Coverage: 20 sq ft, based on 16" o.c. joist spacing
-
- Compatible materials: Composite fascia boards, including Trex Transcend, Select & Enhance; Approved for use in pressure treated lumber such as ACQ
- Compatible tools: 18V or Greater cordless drill recommended
- Coverage: 100 Linear ft
-
MPN: P-CTX100TSFP SKU: P-CTX100TSFP- Compatible materials: Trex Transcend Decking
- Includes: Screws, Plugs, Setting Tools
- Recommended spacing: 16" OC or Closer
-
MPN: P-CTX100SLMD SKU: P-CTX100SLMD- Certifications & listings: Galvanized screws ACQ approved; corrosion resistant
- Compatible materials: Trex Select Decking
- Includes: Screws, Plugs, Setting Tools
-
MPN: P-F-4058-TCGS SKU: P-F-4058-TCGS- Compatible materials: TC-G works in pre-grooved decking planks; to use with non-grooved decking planks, also use FastenMaster's TC-150 slot cutter
- Installation method: Required tools include power screw gun with ratcheting torque setting, Tiger Claw slot cutter, router and safety glasses
- Brand: FastenMaster
-
MPN: P-FMCTXF-TX50TSLM SKU: P-FMCTXF-TX50TSLM- Coverage: 50 lineal feet
- Includes: (100) 1-3/4 in Screws, (105) Plugs, (1) Counterbore tool, (1) Setting tool
- Installation method: 18V or greater cordless drill can be used for all parts of the installation. An impact driver is not recommended.
-
MPN: P-FMCTXCLTX1LFTSLM SKU: P-FMCTXCLTX1LFTSLM- Compatible materials: Trex Transcend Decking
- Compatible tools: Drill with a 1/2” Chuck either Corded or Battery Powered of at Least 18 Volts.
- Includes: Screws, plugs & setting tools. 100 Ln ft size includes (224) Screws & (240) Plugs. 300 sq ft size includes (1125) Screws & (1200) Plugs.