PA44TZ

PA Series Post Anchor - Triple Zinc Finish
Hanger Hardware
MPN: PA44TZ PA44TZ

  • Brand: Mitek
  • Finish: G-185 Galvanizing
  • Gauge: 18
  • Height: 2-1/4 in
  • Item Recyclable: Yes
  • Item Returnable: Yes
  • Length: 3-1/2 in
  • Made in US: No
  • Manufacturer: MITEK USP STRUCTURAL CONNECTOR
  • Material: Steel
  • Width: 3-9/16 in
  • : PA44TZ

Post Anchors are used to secure wood posts to concrete footings. These post anchors also provide moisture damage protection and feature a 1" stand-off plate to elevate wood posts above concrete surfaces as required by building code.

The 1 inch elevation with built-in drain slots keeps post dry and is recommended for extending the life of posts in decks, carports and other exposed structures.

Not recommended for fence posts or other unrestrained (not fixed or fastened at top) applications. These anchors are not designed to resist overturning (moment) loads.

Anchor bolt installation – place specified diameter anchor bolt at desired location with minimum 4″ embedment into minimum 2,500 psi concrete. A minimum 2″ edge distance from the outermost edge of the post base to the edge of the concrete is required to achieve allowable loads.

  • High capacity utilizing 4-sided design
  • 2 PCS. PER ANCHOR = 1-BASE & 1 ELEVATED PLATE
  • Use all specified fasteners; Install with supplied washer
  • Anchor bolts and nails are not furnished
  • Triple Zinc (G-185) for use with ACQ & CA-B treated lumber.